“Ilford Ilfosol-3 – Black & White Film Developer (500ml)” has been added to your cart.
View cart
Showing 1–16 of 29 results
-
$19.95Designed for use in the Paterson Super System 4 tanks. The reels are adjustable to to accommodate 35mm, 127 and 120 film sizes.
The reels have a smooth finish to allow for free flow of solution and are equipped with a twin ball ratchet loading system that ensures easy loading of the film.
In Use:
When adjusting the reel to accommodate different sizes of film hold one end of the reel in your left hand and the other end in your right hand. Then turn each end of the reel in opposite directions until the two part of the reel unlock. The two halves of the
reel can now be slid apart until the correct width for the film to be processed is reached. Now turn each half of the reel in opposite directions to re-lock the two halves in the new position. With new reels the two halves my require extra pressure to unlock them, but this eases with use.
-
$16.85Kodak D-76 Developer is a classic multi-use black & white film developer.
Limit One per customer till supply lines stabilise.
D-76 provides full emulsion speed and excellent shadow detail with normal contrast, and produces fine grain with a variety of continuous-tone black-and-white films.
For greater sharpness, but with a slight increase in graininess, you can use a 1:1 dilution of this developer.
It yields a long density range, and its development latitude allows push processing with relatively low fog.
-
$25.00Kodak D-76 Developer is a classic multi-use black & white film developer.
Limit One per customer till supply lines stabilise.
D-76 provides full emulsion speed and excellent shadow detail with normal contrast, and produces fine grain with a variety of continuous-tone black-and-white films.
For greater sharpness, but with a slight increase in graininess, you can use a 1:1 dilution of this developer.
It yields a long density range, and its development latitude allows push processing with relatively low fog.
-
Sale!
$6.25 – $22.50Price range: $6.25 through $22.50Available in four sizes 5×7 , 8×10″, 10×12″, 12×16″ and now 16×20″.
They are injection moulded from thick polypropylene. The specially designed
base ribbing gives both maximum stability and economy with processing solution.
The moulding along one edge gives support to a thermometer allowing a constant
check of solution temperature.
-
$1.95Film Drip dry hooks
(Sold Individually)
-
Sale!
$30.50 Original price was: $30.50.$28.00Current price is: $28.00.Designed to remove excess water from the surface of a film before drying. The Squeegee has extra soft rubber blades that removes water droplets from the surface of the newly processed film. This prevents drying marks on the negatives.
For best results use a few drops of wetting agent in the final washing water.
-
$37.95The Force Film Washer allows faster washing of film in around 5 to 10 minutes. Designed to fit into the top of all Super System 4 Tanks, it directs the flow of water down to the bottom of the tank, which in turn pushes the water already in the tank out through the top rim. This ensures rapid change of wash water, which assists the fast removal of the residual chemistry.
*Processing Tank Not Included*
-
Sale!
$88.50 Original price was: $88.50.$81.00Current price is: $81.00.Ilford Hypam Fixer is a non-hardening rapid fixer supplied as a liquid concentrate that is diluted with water for use.
Hypam is easy and convenient to use. Without the addition of a hardener it is suitable for all black and white film and paper, manual and machine processing applications in the temperature range of 18°C (66°F).
It can also be used for fixing other specialist, X-ray, scientific products and graphic arts materials.
The fixing agent in HYPAM is ammonium thiosulphate, it contains no sodium thiosulphate (hypo).
-
$16.95Ilford ID -11 Film Developeris for use where fine grain negatives are required without a loss of emulsion speed.
ID -11 ensures the best balance of fine grain, sharpness and tonal rendition, and can be used with all formats of film, producing negatives which allow a high degree of enlargement.
ID -11 is supplied as a powder and shows exceptional consistency in performance throughout its working life. ID -11 is a Metol – Hydroquinone borax type of developer.
It is made up to a stock solution for normal tank or tray use, and can be further diluted 1+1 or 1+3 for users who prefer longer development times, a higher degree of sharpness, and are willing to use ID -11 on a “one- shot” basis.
-
Sale!
$33.50 Original price was: $33.50.$31.50Current price is: $31.50.Ilford ID -11 Film Developer is for use where fine grain negatives are required without a loss of emulsion speed.
ID -11 ensures the best balance of fine grain, sharpness and tonal rendition, and can be used with all formats of film, producing negatives which allow a high degree of enlargement.
ID -11 is supplied as a powder and shows exceptional consistency in performance throughout its working life. ID -11 is a Metol – Hydroquinone borax type of developer.
It is made up to a stock solution for normal tank or tray use, and can be further diluted 1+1 or 1+3 for users who prefer longer development times, a higher degree of sharpness, and are willing to use ID -11 on a “one- shot” basis.
-
$32.00Key Features:
- Fine Grain
- Optical Sharpness
Ilfosol-3 Film Developer is an enhanced, one-shot updated version of Ilford’s Ilfosol-S. It has been created to suit the needs of photographers who prefer to use slower speed films such as Pan-F, FP4 Plus and Delta 100 Professional.
This is a fine grain and ultra sharp developer when used with films processed at full speed. However, you may use it at a 1:14 dilution for other films with only a minimal loss of image quality. It is supplied as a concentrate in economical 500ml bottles and is diluted (typically at a ratio of 1:9) for one-shot use.
-
$25.95ILFORD ILFOSTOP is a low odour, citric acid stop bath which stops further development of paper or film. It also prolongs the life of the fixer bath, maintaining the activity of your fixer solution, by neutralising the developer.
ILFOSTOP contains an indicator dye that is pH sensitive and changes colour from yellow to purple as the stop bath becomes exhausted.
-
$39.00Ilfotol can also be used as a final rinse before drying fibre based prints, again, it promotes rapid, even drying. Additionally it can be used to clean glass and plastic lenses and filters and as an antistatic treatment.
- Ilford Ilfotol – 1 litre of developer liquid concentrate.
-
$50.00- Liquid Concentrate
- Yields a Neutral Image
- Normal Dilution is 1+9
-
$38.13 – $182.00Price range: $38.13 through $182.00The 5th generation of our MULTIGRADE Resin Coated, variable contrast black & white photo paper. Ideal for beginners and advanced users.
- Medium weight 190gsm resin coated paper
- Neutral base tint
- Available in sheets and rolls
-
$38.13 – $65.27Price range: $38.13 through $65.27The 5th generation of our MULTIGRADE, Resin Coated, variable contrast black & white photo paper. Ideal for beginners and advanced users.
- Medium weight 190gsm resin coated paper
- Neutral base tint
- Available in sheets and rolls